Valspar Premium Exterior uPVC & composite Multi-surface Satin Paint, Base 1, 750ml

• Suitable for uPVC & composite
• Stain resistant
• Washable
• Surface Preparation - For new uPVC wait at least 12 months before painting. Ideally, wait for a dry day above 10°C, and not likely to rain. Cold, wet weather can stop the paint from drying properly. Make sure the area you're painting is clean, dry and free from dirt, dust & grease. Sand the area to give an even finish and good adhesion. For best results, sand with fine sandpaper, wash the surface with warm soapy water, rinse and leave to dry thoroughly before painting. Make sure the surface is smooth, any damaged areas will need repairing before painting. If you're painting over previously painted uPVC and the paint is in good condition, give the surface a light sand for good adhesion. If it’s flaking or cracked, you’ll need to sand it first, clean up any dust and wipe with a damp cloth. You can apply our uPVC Paint directly to the surface without the need of a primer.
• Instructions for Use - Give the paint a good stir. Paint with a brush or roller. Leave to dry for 2-4 hours and apply your second coat. If you’re painting over a dark colour you may need to put a third coat on. For best results, lightly sand in-between coats and wipe with a cloth to remove dust. Your last coat will be waterproof in 1 hour.
• Guarantee - Statutory

Features and benefits

• Resists cracking & flaking
• Mould & stain resistant
• No primer needed
• Rainproof in 1 hour
• Suitable for Composite
• 10 Year Protection